Products > Aluminum-Housed Braking Resistor
Aluminum-Housed Braking Resistor has a high power-to-size ratio and is specially designed for DBR applications & other uses. Excellent short-term overload capacity. It has a small and sleek design and can easily be mounted in congested control panels. High-Temperature-Resisting Hard Anodizing Aluminum Housing. High power ratings can be achieved by multiplying individual resistors to form DBR banks. NON-INDUCTIVE types available.
|
Sr. No.
|
Specification
|
|---|---|
|
1
|
Power Ratings Up to 4000 Watts in a Single Module.
|
|
2
|
Ohmic Value: 0.1Ω to 10KΩ
|
|
3
|
Ohmic Tolerance: Standard ±5%. Closer Tolerances Available.
|
|
4
|
Temperature coefficient: ±50 ppm/ºC to ±200 ppm/ºC
|
|
5
|
Dielectric Strength: 2 kV a.c. for 1 Minute
|
|
6
|
Insulation Resistance: >2000MΩ at 500V a.c.
|
|
7
|
Overload: 5X for 5 seconds
|
“Rohms” Precision Wire Wound Resistors, Motor Starting Resistors, Potentiometers, Rheostats, Dynamic Braking Resistors, Aluminum Housing Resistors, Load Banks, and S. S. Grid Resistance.
© 2025 G.V. Electronics | Designed & Developed by Dot Com Designers
